Skip to content 
Fireplace & Stove Inspection in Arlington, WA
Know what it needs, and what it doesn't.
$150 for gas, pellet, or wood. Your technician checks the fireplace and its venting, tells you plainly what they found, and quotes anything that needs fixing before any work starts.
- Licensed & Bonded · WA Reg KINGSSI741L5
Licensed & Bonded
WA Reg KINGSSI741L5
30+ Year Technician
Gas, Wood, and pellet
60 Day Warranty
On every service
Quick Reply
Monday to Friday
What the inspection covers?
No two fireplaces are set up quite the same. Your technician checks what applies to yours; here’s what that usually includes.
- Runs. The fireplace or stove lit and run, so your technician sees what you see.
- Unit. Body, glass, door seal, and visible parts checked for wear, damage, or missing pieces.
- Controls. The switch, remote, thermostat, or control board checked that it responds.
- Fuel. The gas connection checked for leaks, or the pellet feed checked that it moves pellets the way it should.
- Venting. The pipe or chimney checked inside and out, as far as can be reached: joints, supports, and visible damage.
- Outside. The cap or outside vent checked for blockages, nests, and damage.
- Surroundings. A check that nothing near the fireplace or stove is too close to the heat.
- The cause. If something isn't working right, your technician tracks down why.
Ready for your inspection
- Positioning matters
Good to know
How it works
- Book a visit. Tell us what’s going on: it won’t light, you’re selling, it’s been years, or the vent looks off.
- Your technician comes out. They check the fireplace and venting, find the cause, and walk you through it in plain terms.
- Light it. You have the report and the quote in hand. Nothing happens until you say yes.
How much does a fireplace or stove inspection cost in Arlington?
Inspection
Cost
$150
Type
Gas, wood, or pellet
Which
Service or inspection?
A service visit includes the inspection. An inspection is just the inspection.
Service is the full appointment on this page: your technician inspects the unit, cleans it, tunes it, fixes what’s fixable, and leaves it running the way it should — with a written summary of what they found. If you want the fireplace working, this is the one.
An inspection on its own is a $150 evaluation with a written report. Nothing’s cleaned or adjusted. It’s for a home sale, an insurance question, or when you want to know what you’re dealing with before spending more. If you only need the fireplace assessed, that’s the one.
Not sure which you need? Call — we can help you decide.
- Warranty terms
When does an inspection make sense?
Something’s not right. It won’t light, shuts itself off, or isn’t running the way it used to. Find out why and what the fix costs.
Buying or selling a home. You get a written report of what the fireplace needs, so it’s an answer at the closing table instead of a question.
It’s been a while. You haven’t used it in years, or it came with the house. Know where it stands before the first fire.
The venting doesn’t look right. The pipe sags, the cap is damaged, or there’s staining around the outside vent.
- Why Alpenglow
Why Alpenglow
Is Alpenglow the right company for your fireplace inspection?
Service Area
What areas does Alpenglow serve for fireplace inspections?
Alpenglow services fireplaces in Arlington 98223 and across North Snohomish County: Arlington, Camano, Stanwood, Marysville, Granite Falls, and Snohomish. Staying local is why we can reply the same business day instead of booking you into next month.
- Our Service Area
Serving Arlington and North Snohomish County
Alpenglow Fireplace Services
PO Box 395, Arlington, WA 98223
Phone: (360) 548-3747
Hours: Monday to Friday, 9:00am to 5:00pm
WA Reg: KINGSSI741L5
FAQ
Common questions
How long does a service visit take?
Usually 30-60 minutes depending on the condition of the unit.
What if you find something broken during the service?
You hear about it that day with a price attached, and you decide. We do not fix things you did not approve and add them to the invoice. If it is a safety issue we will tell you plainly whether the unit is safe to run in the meantime, because that is the part that actually matters.
What does the inspection cover?
Your technician checks the fireplace itself, the fuel connection, the controls, and the venting inside and out. If something isn’t working, they find out why.
Is the repair included?
No. The inspection finds the cause and prices the fix. Nothing happens until you say yes.
Can you inspect a fireplace before I buy or sell a home?
Yes. You get a written report of what your technician found, to share with the buyer, the seller, or your agent.
Request Service
Book your service
Tell us what your fireplace or chimney needs and our team will get you on the schedule.
- Upfront pricing
- Licensed and bonded, WA Reg KINGSSI741L5
- Local to Arlington
Fast Service Request
Tell us what you need
Fill this out and we reply quickly.
- No obligation.
